Every Trade.One Trusted Source.
Trade Source IRE: common home issues, simple checks and the right trades

Trade Source IRE Homeowner Guide

Common Home Issues: Safe Checks & the Trades You Need

Spot common home problems, learn safe checks and find the right trade for leaks, damp, heating, electrics and repairs in Ireland with Trade Source IRE.

Home checks and choosing the right trade

Common problems at home: what to check and who to call

Start with observation, not dismantling

A damp patch, cold radiator or sticking window can have more than one cause. Record what you notice, when it happens and whether it is getting worse. Photographs taken from a safe position can help a professional decide what to inspect. These checks help you describe a problem; they do not prove its cause or replace an inspection.

Urgent warning signs: do not wait for a website enquiry

Fire, smoke, electric shock, collapse danger or immediate risk to life: move to safety and call 112 or 999. Keep away from water near electrical equipment.

Smell of gas: do not use flames, switches or plugs. Leave the affected area and call Gas Networks Ireland on 1800 20 50 50 from outside, away from the leak. If you cannot get through, call 112 or 999. Follow Gas Networks Ireland’s emergency instructions.

A carbon monoxide alarm or suspected exposure: get everyone into fresh air immediately. Seek urgent medical help if anyone feels unwell; call 112 or 999 for an emergency. Do not return to use the appliance until the source has been professionally assessed. See Gas Networks Ireland’s carbon monoxide guidance.

Which trade should you contact?

What you noticeLikely first contactUseful information
Dripping pipes, running toilet or water under a sinkPlumberLocation, when it happens, visible water
Recurring condensation, mould or damp patchesBuilding surveyor or suitable damp/ventilation specialist; plumber or roofer if a leak is suspectedRoom, weather, ventilation and affected surface
No heating or uneven radiator temperaturesHeating engineer; Registered Gas Installer for gas workSystem type, fault code and affected rooms
Repeated trips, scorch marks or flickering circuitsRegistered Electrical ContractorWhat was running and which circuit was affected
Rain-related ceiling stains or overflowing guttersRoofer or gutter specialistGround-level photos and weather pattern
Draughty or sticking windows and doorsWindow/door specialist, glazier or carpenterMaterial, age, seal or hardware issue
Growing cracks, movement or saggingStructural engineer or building surveyor before repairDated photographs and changes over time
Loose tiles or damaged plasterboardTiler, plasterer or dryliner after the cause is resolvedExtent, loose material and any dampness

1. Leaks, dripping taps and running toilets

Safe checks: look at accessible pipework and the cupboard beneath sinks without removing panels or touching electrics. Listen for a toilet that keeps refilling and look for a trickle into the bowl after flushing has finished. From outside at ground level, look for a dripping overflow. Note whether the problem follows use of a shower, tap or appliance.

Who can help: a plumber can trace leaks and repair pipes, valves and fittings. If there is active flooding, use a known, safely accessible stop valve only if you know how; keep clear of wet electrical areas and obtain urgent help. Do not climb into an unsafe attic or force a stuck valve.

Uisce Éireann’s leak-check guide explains useful household observations. If all taps lose pressure together, check local supply guidance as well. Read our plumber cost guide or find plumbers.

2. Condensation, mould and unexplained damp

Safe checks: note whether moisture appears on windows after cooking or showering, on cold external walls, or after rain. Check that visible ventilation openings are unobstructed and that extract fans respond to their normal controls. Photograph recurring patches. Do not seal vents to stop a draught or cover damp with new paint or boards before its source is understood.

Who can help: ventilation specialists can assess airflow; a plumber can investigate pipework; a roofer can inspect rain entry. A building surveyor can help when the cause is unclear. Condensation, plumbing leaks and penetrating moisture require different remedies.

SEAI’s ventilation guide explains why fresh-air supply and moisture extraction matter. See our warmer-home guide. Extensive or recurring mould needs appropriate professional assessment rather than a cosmetic repair.

3. No heating, cold radiators or boiler faults

Safe checks: read the thermostat setting, heating schedule and any fault code visible on the display. Note whether hot water still works and whether one radiator or the entire home is affected. Consult the appliance’s user instructions for normal controls. Do not remove the casing, alter gas fittings or repeatedly reset a boiler that locks out.

Who can help: use a heating engineer suited to your system, a Registered Gas Installer for gas work, or a suitably qualified oil/heat-pump service professional. Mention the make, model and recent service history.

SEAI’s heating-controls checklist is a useful starting point. Our gas boiler servicing guide explains the service enquiry process. Gas smells and carbon monoxide alarms require the urgent response above.

4. Electrical trips, damaged sockets and flickering lights

Safe checks: observe without opening covers. Record repeated tripping, visible scorch marks, damaged leads or which appliances were in use. Stop using suspect equipment. Do not touch a hot, sparking or wet socket, repeatedly reset a tripping circuit or attempt a wiring repair.

Who can help: a Registered Electrical Contractor should investigate installation faults. For damage or burning at the electricity meter or incoming supply, keep clear and follow CRU guidance on meters and appliances; supply equipment belongs to ESB Networks.

Read ESB Networks’ installation safety guidance and our registered electrician guide. For routine enquiries, find electricians in your county.

5. Roof leaks, overflowing gutters and ceiling stains

Safe checks: from ground level, look for overflowing gutters, detached downpipes or visible slipped roof coverings. Indoors, note whether staining follows rain and whether it is spreading. Take photos from a safe position; do not climb onto roofs, lean out of windows or walk on attic insulation.

Who can help: a roofer can assess coverings, flashings and weather entry; a gutter specialist can deal with gutters and downpipes. Water can travel before appearing, so the stain may not sit directly beneath the fault. A plumber may be needed if there is pipework or a bathroom above it.

Keep away from a bulging or sagging ceiling and arrange urgent assessment. Do not puncture it or stand underneath. Our roof repair guide helps you prepare a quotation request; browse roofing contractors by county.

6. Draughty windows, stiff doors and failed seals

Safe checks: use normal handles gently and look for damaged seals, visible gaps or condensation trapped between glazing panes. Note whether the issue is seasonal, affects one opening or began alongside wall cracking. Do not force a jammed unit, adjust heavy glazed doors yourself or use a flame to trace draughts.

Who can help: a window and door specialist or glazier can assess glazing and hardware; a carpenter may suit a timber door problem. An opening that has suddenly distorted with surrounding cracks needs building assessment too.

See our windows and doors guide and find specialists. SEAI’s insulation, windows and doors guidance provides upgrade context. Preserve required ventilation when addressing draughts.

7. Cracks, uneven floors or visible movement

Safe checks: photograph cracks with dates and a ruler placed beside them, only where accessible and safe. Record changes, sticking doors or new unevenness. A photograph or crack width alone cannot establish whether a defect is cosmetic or structural.

Who can help: a structural engineer or building surveyor should assess new, widening or recurring cracks, movement or sagging before a builder undertakes repairs. Sudden movement or collapse concerns mean keeping everyone out of the affected area and seeking urgent assistance. Filling the crack first can hide evidence.

Our home maintenance guide helps organise observations; building contractors can quote for remedial work once its scope has been established. Trade Source IRE does not diagnose structural defects from an enquiry.

8. Loose tiles, damaged plaster and plasterboard

Safe checks: look for cracks, lifting edges, soft or stained surfaces and loose material without pulling it off. Keep people away from falling tiles or ceiling finishes. Note nearby leaks or recent impact damage.

Who can help: a tiler, plasterer or dryliner can repair finishes after the underlying cause is dealt with. Damp, movement and failed backgrounds may need another professional first. Replacing boards or adding grout is not automatically a cure for a leak.

Read our drylining types and prices guide, tiling guide or plastering guide to compare the likely scope.

How Trade Source IRE helps you find the right tradespeople

Send one clear enquiry with your county or town, the affected room, what you have observed, when it started, photographs taken safely and your preferred timeframe. Mention previous repairs and any inspection findings. If you are unsure which trade to select, explain the symptoms in the project-details box.

Trade Source IRE reviews enquiries and helps connect them with suitable professionals where available. It is free to enquire, with no obligation. You choose who to appoint and confirm qualifications, insurance, scope, pricing and availability directly. This is an enquiry service, not an emergency dispatch service.

Tell us about your home issue → Browse our tradesmen showcase →

A useful home-check record

  • Keep dated photos and a short description of each issue.
  • Check smoke and carbon monoxide alarms as directed by their manufacturers.
  • Know where safely accessible shut-offs are before an emergency.
  • Keep service records and previous repair invoices together.
  • If renting, report problems promptly to your landlord or agent; use emergency services first where there is immediate danger.

Sources and further reading

Reviewed 14 November 2026. The official sources support the relevant safety and maintenance advice linked above. Trade matching is practical editorial guidance, not a remote diagnosis.